Explosion-proof H22S Low Clearance Rotary Manual Pipe Cutter for Pipes of 20 Inch to 22 Inch in Diameter

Feature：

Cold cutting: no spark， no big heat

Environmentally friendly: no debris when cutting process

Use for the already installed pipe fittings.

Squeezing cutting with better working performance

Cutting blade is interchangeable with Reed.

The low profile design of H22S rotary manual pipe cutter needs only 5 inch (127 mm) clearance for up to 22 inch pipe diameter.

H22S rotary manual pipe cutter is supplied with a slip-on handle that is used to turn and tighten the cutter. 

Provides a square cut and can be used in close quarters anywhere – in the ditch,underwater, in noise-free zones, over head, in racks of pipes, etc. 

H22S rotary manual pipe cutter operates with minimal cutter rotation (45 degree).

Safe, clean, straight cuts are easy with these manual-operated cutters. 

Suitable to cut steel pipe, cast iron Pipe, galvanized pipe, ductile iron pipe and black iron pipe.

With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. 

Cold cut large diameter steel, stainless steel pipe in close quarters.